Craft Unique CBP CU3DP by WT Craftbot Plus
Updated 30 September 2026 · Live prices updated daily
Buy on Amazon.co.uk - £1552.80 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
Nothing jumps out on the spec sheet as a standout feature at this price.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! Over £1,500 - you are paying for polish and ecosystem, not raw capability. Cheaper machines match the hardware on paper.
Head-to-head spec + price table against the Craft Bot Craft Unique CBP CU3DP by WT Craftbot Plus. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (£1553). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇬🇧 Craft Unique CBP CU3DP by WT Craftbot Plus 3D Printer, PLA/ABS, RAL 9016 Traffic, WhiteAmazon.co.uk · New£1552.80View
Close alternatives - what $1553 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 51.7 L. You'd give up: nothing obvious on the spec sheet.
Get: 1.6 L more build volume (11.6 L) · 290°C hot end (was 260°C).
Get: 9.0 L more build volume (19.0 L) · 300°C hot end (was 260°C).
Frequently asked
What materials can the Craft Bot Craft Unique CBP CU3DP by WT Craftbot Plus print? +
At £1553 the Craft Bot Craft Unique CBP CU3DP by WT Craftbot Plus is a PLA, PETG, TPU machine. The 260°C hot end covers PETG with a small safety margin. ABS and nylon need an enclosure plus more heat - not this printer.
How big can I print on the Craft Bot Craft Unique CBP CU3DP by WT Craftbot Plus? +
250×200×200 mm (10.0 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Is the Craft Bot Craft Unique CBP CU3DP by WT Craftbot Plus worth £1553? +
£1553+ is prosumer/workshop money. Diminishing returns on print quality versus a $700-1000 machine; real returns on long-term reliability, support contracts and replacement parts. Worth it if the printer makes you money, overkill if it is a weekend hobby.
