Centauri Carbon
Updated 6 September 2026 · Live prices on every page load from Amazon US + UK
Buy on Amazon.com - $298.99 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ✓ 320°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ✓ 32 mm³/s volumetric flow - genuinely fast, not just advertising-fast.
- ✓ Under $300 - low-risk way to get into 3D printing without regretting the spend.
- ! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.
Head-to-head spec + price table against the Elegoo Centauri Carbon. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Cheap enough to add as a second machine but it's not the jump forward an upgrade is meant to be. Consider a used P1S or a Voron kit instead.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($299). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇺🇸 ELEGOO Centauri Carbon 3D Printer, CoreXY 500mm/s High Speed Printing with Auto Calibration, 320°C Nozzle and Built-in Camera, Ready to Print Out of the Box, 256x256x256mm Printing SizeAmazon.com · New$298.99View
- 🇺🇸 ELEGOO Centauri Carbon 3D Printer, CoreXY 500mm/s High Speed Printing with Auto Calibration, 320°C Nozzle and Built-in Camera, Ready to Print Out of the Box, 256x256x256mm Printing SizeAmazon.com · Used$298.99View
Close alternatives - what $299 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 20.3 L. You'd give up: 320°C hot end vs 300°C.
Get: 24.2 L more build volume (41.0 L).
Modest upgrade on the spec sheet.
Frequently asked
What materials can the Elegoo Centauri Carbon print? +
At $299 the Elegoo Centauri Carbon has the hot end for engineering materials (320°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the Elegoo Centauri Carbon? +
Genuinely fast. Volumetric flow is 32 mm³/s, which means the hot end can melt plastic fast enough to keep up with the motion system. This is the tier where "500 mm/s" marketing claims translate into actual finished parts in half the time of a bedslinger.
How big can I print on the Elegoo Centauri Carbon? +
256×256×256 mm (16.8 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the Elegoo Centauri Carbon have auto-levelling? +
Yes - Auto-leveling auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Elegoo Centauri Carbon worth $299? +
$299 is the sweet spot tier. The Elegoo Centauri Carbon competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
