Drukarka 3D Adventurer 5M
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.pl - zł1139.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the FLASHFORGE Drukarka 3D Adventurer 5M. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
This is the kind of move that makes you wonder why you put up with your old machine for so long. Faster, more rigid, and the first layer stops being a gamble.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (zł1139). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇵🇱 Flashforge Drukarka 3D Adventurer 5M, szybka drukarka 3D 600 mm/s z automatyczną aktualizacją, dysza szybkiej wymiany i płyta PEI, 220 x 220 x 220 mmAmazon.pl · Newzł1139.00View
Close alternatives - what zł1139 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: nothing obvious on the spec sheet.
Get: 300°C hot end (was —°C).
Get: 300°C hot end (was —°C).
Frequently asked
What materials can the FLASHFORGE Drukarka 3D Adventurer 5M print? +
At zł1139 the FLASHFORGE Drukarka 3D Adventurer 5M realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How fast is the FLASHFORGE Drukarka 3D Adventurer 5M? +
Advertised at 600 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the FLASHFORGE Drukarka 3D Adventurer 5M? +
220×220×220 mm (10.6 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the FLASHFORGE Drukarka 3D Adventurer 5M have auto-levelling? +
Yes - Automatic auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the FLASHFORGE Drukarka 3D Adventurer 5M worth zł1139? +
zł1139+ is prosumer/workshop money. Diminishing returns on print quality versus a $700-1000 machine; real returns on long-term reliability, support contracts and replacement parts. Worth it if the printer makes you money, overkill if it is a weekend hobby.
