AD5X Impresora 3D Multicolor
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.es - €349.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the FLASHFORGE AD5X Impresora 3D Multicolor. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
This is the kind of move that makes you wonder why you put up with your old machine for so long. Faster, more rigid, and the first layer stops being a gamble.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€349). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇪🇸 Flashforge AD5X Impresora 3D Multicolor, 220x220x220mmAmazon.es · New€349.00View
- 🇪🇸 FLASHFORGE AD5X Impresora 3D Multimaterial, Impresión Multicolor, 600 mm/s, Impresión de 1 Clic, Creaciones IFS, Calibración Automática, Respaldo de FilamentosAmazon.es · New€349.00View
- 🇪🇸 Impresora 3D Multicolor Flashforge AD5X para impresión de Alta Velocidad en 4 Colores, Velocidad máxima de 600 mm/s, nivelación automática con un Solo Clic, Impresora 3D multimaterial con IFSAmazon.es · New€349.00View
- 🇪🇸 FLASHFORGE Impresora 3D multicolor AD5X, CoreXY 600mm/s de alta velocidad, nivelación automática de 1 clic, extrusora de accionamiento directo de 300 °C, volumen de construcción de 220 x 220 x 220 mmAmazon.es · New€441.43View
- 🇪🇸 FLASHFORGE AD5X - Impresora 3D Multicolor de 4 Colores con IFS, Impresora 3D FDM de nivelación Totalmente automática con impresión de Alta Velocidad máxima de 600 mm/s y Boquilla máxima de 300 °CAmazon.es · New€446.60View
- 🇪🇸 Flashforge AD5X Multi-Color 3D Printer, 600mm/s High-Speed 4 Color 3D Printer with 300˚C Nozzle, Auto Leveling and Pei Flexible Plate, 8.7 x 8.7 x 8.7inAmazon.es · New€450.60View
Close alternatives - what €349 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 10.6 L vs 3.4 L build volume, 300°C hot end vs undefined°C.
Get: 9.6 L more build volume (20.3 L).
Get: 77.6 L more build volume (88.2 L).
Frequently asked
What materials can the FLASHFORGE AD5X Impresora 3D Multicolor print? +
At €349 the FLASHFORGE AD5X Impresora 3D Multicolor has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the FLASHFORGE AD5X Impresora 3D Multicolor? +
Advertised at 600 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the FLASHFORGE AD5X Impresora 3D Multicolor? +
220×220×220 mm (10.6 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the FLASHFORGE AD5X Impresora 3D Multicolor have auto-levelling? +
Yes - Strain gauge auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the FLASHFORGE AD5X Impresora 3D Multicolor worth €349? +
€349 is the sweet spot tier. The FLASHFORGE AD5X Impresora 3D Multicolor competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
