CFS Filament Management System
Updated 7 September 2026 · Live prices on every page load from Amazon US + UK
Buy on Amazon.com - $1191.63 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ✓ 350°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ✓ 42.9 L build volume - room for helmets, large functional parts, bulk runs.
- ! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.
Head-to-head spec + price table against the Comgrow CFS Filament Management System. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
This is the kind of move that makes you wonder why you put up with your old machine for so long. Faster, more rigid, and the first layer stops being a gamble.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($1192). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇺🇸 Comgrow CFS Filament Management System (Without Filaments) and Creality K2 Plus 3D PrinterAmazon.com · New$1191.63View
- 🇺🇸 Creality K2 Plus Combo 3D Printer Multi Color Printing with CFSAmazon.com · New$1199.00View
- 🇺🇸 Comgrow Creality K2 Plus Combo 3D Printer and Creality Nozzles 0.4mm and Hotend Silicone Socks 2PCSAmazon.com · New$1210.55View
- 🇺🇸 Comgrow Creality CFS 3D Printer Multi Color Auto Filament System and Creality K2 Plus Combo 3D PrinterAmazon.com · New$1450.29View
Close alternatives - what $1192 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 42.9 L. You'd give up: nothing obvious on the spec sheet.
Get: 8.8 L more build volume (51.7 L) · 370°C hot end (was 350°C).
Get: a proper heated chamber, so ABS/ASA/nylon become realistic.
Frequently asked
What materials can the Comgrow CFS Filament Management System print? +
At $1192 the Comgrow CFS Filament Management System has the hot end for engineering materials (350°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the Comgrow CFS Filament Management System? +
Advertised at 600 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Comgrow CFS Filament Management System? +
350×350×350 mm (42.9 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.
Is the Comgrow CFS Filament Management System worth $1192? +
$1192+ is prosumer/workshop money. Diminishing returns on print quality versus a $700-1000 machine; real returns on long-term reliability, support contracts and replacement parts. Worth it if the printer makes you money, overkill if it is a weekend hobby.
