Ender 3 V3 KE 3D-skrivare för nybörjare
Updated 5 November 2026 · Live prices updated daily
Buy on Amazon.se - kr3059.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! Over kr1,500 - you are paying for polish and ecosystem, not raw capability. Cheaper machines match the hardware on paper.
Head-to-head spec + price table against the Creality Ender 3 V3 KE 3D-skrivare för nybörjare. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (kr3059). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇸🇪 Creality Ender 3 V3 KE 3D-skrivare för nybörjare, upp till 500 mm/s utskriftshastighet, FDM-skrivare med Sprite Direct-extruder och utskriftsstorlek 220x220x240 mm, utrustad med bilnivellering.Amazon.se · Newkr3059.00View
Close alternatives - what kr3059 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 12.1 L. You'd give up: 300°C hot end vs 260°C.
Get: 6.0 L more build volume (17.6 L).
Get: CoreXY motion - faster, more rigid.
Frequently asked
What materials can the Creality Ender 3 V3 KE 3D-skrivare för nybörjare print? +
At kr3059 the Creality Ender 3 V3 KE 3D-skrivare för nybörjare has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the Creality Ender 3 V3 KE 3D-skrivare för nybörjare? +
Advertised at 500 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Creality Ender 3 V3 KE 3D-skrivare för nybörjare? +
220×220×240 mm (11.6 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the Creality Ender 3 V3 KE 3D-skrivare för nybörjare have auto-levelling? +
Yes - CRTouch auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Creality Ender 3 V3 KE 3D-skrivare för nybörjare worth kr3059? +
kr3059+ is prosumer/workshop money. Diminishing returns on print quality versus a $700-1000 machine; real returns on long-term reliability, support contracts and replacement parts. Worth it if the printer makes you money, overkill if it is a weekend hobby.
