Bosch F0133D45JA Dremel 3D Drucker
Updated 5 November 2026 · Live prices updated daily
Buy on Amazon.de - €1139.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
Nothing jumps out on the spec sheet as a standout feature at this price.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the DREMEL Bosch F0133D45JA Dremel 3D Drucker. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€1139). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇩🇪 Bosch F0133D45JA Dremel 3D Drucker, DigiLab, 3D45Amazon.de · New€1139.00View
Close alternatives - what €1139 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 11.6 L. You'd give up: nothing obvious on the spec sheet.
Get: 4.1 L more build volume (10.6 L).
Get: 11.0 L more build volume (17.6 L) · 300°C hot end (was 280°C).
Frequently asked
What materials can the DREMEL Bosch F0133D45JA Dremel 3D Drucker print? +
At €1139 the DREMEL Bosch F0133D45JA Dremel 3D Drucker has the hot end for engineering materials (280°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How big can I print on the DREMEL Bosch F0133D45JA Dremel 3D Drucker? +
170.18×254×152.4 mm (6.6 L). Mainstream bed size - fits 90 % of what people actually print. Cosplay helmets will need to be sliced into sections.
Does the DREMEL Bosch F0133D45JA Dremel 3D Drucker have auto-levelling? +
Yes - Patented assisted leveling auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the DREMEL Bosch F0133D45JA Dremel 3D Drucker worth €1139? +
€1139+ is prosumer/workshop money. Diminishing returns on print quality versus a $700-1000 machine; real returns on long-term reliability, support contracts and replacement parts. Worth it if the printer makes you money, overkill if it is a weekend hobby.
