Stampante 3D multifunzione
Updated 16 October 2026 · Live prices updated daily
Buy on Amazon.it - €2189.35 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ! Over €1,500 - you are paying for polish and ecosystem, not raw capability. Cheaper machines match the hardware on paper.
- ! 3.1 L build volume - fine for calibration prints and small parts, awkward for anything bigger than a mug.
Head-to-head spec + price table against the Weistek Stampante 3D multifunzione. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€2189). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
Close alternatives - what $2189 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 8.0 L. You'd give up: 300°C hot end vs undefined°C.
Get: 15.9 L more build volume (19.0 L).
Get: 5.0 L more build volume (8.2 L).
Frequently asked
What materials can the Weistek Stampante 3D multifunzione print? +
At €2189 the Weistek Stampante 3D multifunzione has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How big can I print on the Weistek Stampante 3D multifunzione? +
150×150×140 mm (3.1 L). Small build area. Fine for calibration prints, minis, keychains, small functional parts. Awkward for anything bigger than a coffee mug.
Does the Weistek Stampante 3D multifunzione have auto-levelling? +
Yes - Auto Calibration auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Weistek Stampante 3D multifunzione worth €2189? +
€2189+ is prosumer/workshop money. Diminishing returns on print quality versus a $700-1000 machine; real returns on long-term reliability, support contracts and replacement parts. Worth it if the printer makes you money, overkill if it is a weekend hobby.
