XYZ Printing 3F20AXEU00D da Vinci 2.0A
Updated 10 September 2026 · Live prices updated daily
Buy on Amazon.co.uk - £214.75 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ Under £300 - low-risk way to get into 3D printing without regretting the spend.
- ! Max hot-end temp only 210°C - PLA-dominant territory, no PETG with any safety margin.
- ! Manual levelling - plan a weekend of paper-under-the-nozzle rituals before your first clean first layer.
Head-to-head spec + price table against the XYZprinting XYZ Printing 3F20AXEU00D da Vinci 2.0A. Verified printers on this marketplace only.
No auto-levelling means you'll spend your first weekend adjusting screws and fighting first-layer issues. Fine if you want to learn the hard way - frustrating if you just want prints.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (£215). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇬🇧 XYZ Printing 3F20AXEU00D da Vinci 2.0A 3D PrinterAmazon.co.uk · New£214.75View
Close alternatives - what $215 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 14.2 L. You'd give up: nothing obvious on the spec sheet.
Get: 6.1 L more build volume (12.1 L) · 260°C hot end (was 210°C).
Get: 10.8 L more build volume (16.8 L) · 350°C hot end (was 210°C).
Frequently asked
What materials can the XYZprinting XYZ Printing 3F20AXEU00D da Vinci 2.0A print? +
At £215 the XYZprinting XYZ Printing 3F20AXEU00D da Vinci 2.0A realistically prints PLA and TPU. The 210°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How big can I print on the XYZprinting XYZ Printing 3F20AXEU00D da Vinci 2.0A? +
150×200×200 mm (6.0 L). Mainstream bed size - fits 90 % of what people actually print. Cosplay helmets will need to be sliced into sections.
Does the XYZprinting XYZ Printing 3F20AXEU00D da Vinci 2.0A have auto-levelling? +
No - manual levelling only. Plan a weekend tuning the bed with a piece of paper and a hex key before your first clean first layer. At this price in 2026, that is a real drawback.
Is the XYZprinting XYZ Printing 3F20AXEU00D da Vinci 2.0A worth £215? +
£215 is the sweet spot tier. The XYZprinting XYZ Printing 3F20AXEU00D da Vinci 2.0A competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
