Impresora 3D Creality CR-10 SE Velocidad de 600
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.es - €379.02 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the Comgrow Impresora 3D Creality CR-10 SE Velocidad de 600. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€379). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇪🇸 Impresora 3D Creality CR-10 SE Velocidad de 600 mm/s con aceleración de 8000 mm/s² CR Touch, Calentador cerámico de 60V Extrusora Directa de hotend Sprite de 300 °C Diseño, impresión 8.66x8.66x9.84inAmazon.es · New€379.02View
Close alternatives - what €379 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 18.9 L. You'd give up: nothing obvious on the spec sheet.
Get: 75.6 L more build volume (88.2 L).
Get: 5.0 L more build volume (17.6 L).
Frequently asked
What materials can the Comgrow Impresora 3D Creality CR-10 SE Velocidad de 600 print? +
At €379 the Comgrow Impresora 3D Creality CR-10 SE Velocidad de 600 has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the Comgrow Impresora 3D Creality CR-10 SE Velocidad de 600? +
Advertised at 600 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Comgrow Impresora 3D Creality CR-10 SE Velocidad de 600? +
220×220×265 mm (12.6 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the Comgrow Impresora 3D Creality CR-10 SE Velocidad de 600 have auto-levelling? +
Yes - Fully automatic auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Comgrow Impresora 3D Creality CR-10 SE Velocidad de 600 worth €379? +
€379 is the sweet spot tier. The Comgrow Impresora 3D Creality CR-10 SE Velocidad de 600 competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
