Sprite Extruder Pro ，Support 300° High

$95.35 cheapest of 4 live offers

Updated 10 September 2026 · Live prices updated daily

Buy on Amazon.ca - $95.35 →

Affiliate link. Price live from the marketplace, not cached.

At a glance

Technology FDM

Build volume 300×300×340 mm (30.6 L)

Kinematics Bedslinger

Max print speed 150 mm/s

Max hot-end temp 260 °C

Max bed temp 110 °C

Nozzle diameter 0.4 mm

Extruders 1

Enclosure Open

Auto-levelling Manual

Frame Aluminium extrusion

What it gets right

✓ 30.6 L build volume - room for helmets, large functional parts, bulk runs.
✓ Under $300 - low-risk way to get into 3D printing without regretting the spend.

Where it falls short

! Bedslinger design - expect ringing artefacts on tall prints at speed.
! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
! Manual levelling - plan a weekend of paper-under-the-nozzle rituals before your first clean first layer.

Compare this with another printer

Head-to-head spec + price table against the Creality Sprite Extruder Pro ，Support 300° High. Verified printers on this marketplace only.

Who this is for

Buying your first printer

No auto-levelling means you'll spend your first weekend adjusting screws and fighting first-layer issues. Fine if you want to learn the hard way - frustrating if you just want prints.

Upgrading from an Ender or old Prusa

Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.

Workshop or small business

No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.

Verdicts are rule-driven from the spec sheet and current price ($95). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.

Live offers

Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.

🇨🇦

Creality Official Sprite Extruder Pro Kit，Support 300° High Temperature Printing，All Metal Direct Drive Extruder for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 MAX 3D Printers

Amazon.ca · New

$95.35
View
🇨🇦

Creality Official New Sprite Extruder Pro Upgrade Kit, Direct Drive Extruder-Pro Kit for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender3 S1/CR-10 Smart-Pro 3D Printers, Support BL Touch/CR Touch

Amazon.ca · New

$103.55
View
🇩🇪

Creality 3D Offiziell Sprite Extruder Pro Kit Dual Gear Feeding Ganzmetall Design 3,5:1 Übersetzungsverhältnis für Ender 3, Ender 3 Pro, Ender 3 Max, Ender 3 V2，Unterstützt BL-Touch/CR-Touch

Amazon.de · New

€119.00
View
🇬🇧

Creality Ender CR Touch Auto Bed Leveling Sensor Kit Compatible with Ender 3 V2/Ender 3 Pro/Ender 3/Ender 3 Max/Ender 5/Ender 5Pro, which is specifically designed for 3D printer.

Amazon.co.uk · New

£795.57
View

Close alternatives - what $95 gets you elsewhere

Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.

Save the money, similar specs on paper. You'd give up: 30.6 L vs 1.0 L build volume, 260°C hot end vs undefined°C.

Get: 450°C hot end (was 260°C).

Get: 69.4 L more build volume (100.0 L).

Open page →

Frequently asked

What materials can the Creality Sprite Extruder Pro ，Support 300° High print? +

At $95 the Creality Sprite Extruder Pro ，Support 300° High is a PLA, PETG, TPU machine. The 260°C hot end covers PETG with a small safety margin. ABS and nylon need an enclosure plus more heat - not this printer.

How fast is the Creality Sprite Extruder Pro ，Support 300° High? +

Advertised at 150 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.

How big can I print on the Creality Sprite Extruder Pro ，Support 300° High? +

300×300×340 mm (30.6 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.

Does the Creality Sprite Extruder Pro ，Support 300° High have auto-levelling? +

No - manual levelling only. Plan a weekend tuning the bed with a piece of paper and a hex key before your first clean first layer. At this price in 2026, that is a real drawback.

Is the Creality Sprite Extruder Pro ，Support 300° High worth $95? +

At $95 the Creality Sprite Extruder Pro ，Support 300° High is in hobby-entry territory - low-risk way to try the hobby. Expect older motion systems and basic feature sets, but print quality will surprise people coming from five-year-old reviews.

Long readHow to pick your first 3D printerSpec by spec, what actually matters on a first printer and what the marketing hopes you will not question.Read →Long readFDM vs resin 3D printingWhen each process wins, where each fails, and why most beginners should start with FDM.Read →

Prices are live from the marketplace and refresh on every page load. I earn a small commission on purchases made through the affiliate links above - it costs you nothing and keeps the data-gathering running. I never accept free hardware.

At a glance

What this printer gets right and wrong

Live offers

Close alternatives - what $95 gets you elsewhere

Frequently asked

Related reading