K2 SE Impresora 3D con 2 Rollos filamento Hyper
Updated 16 October 2026 · Live prices updated daily
Buy on Amazon.es - €289.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ✓ Under €300 - low-risk way to get into 3D printing without regretting the spend.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the Creality K2 SE Impresora 3D con 2 Rollos filamento Hyper. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Cheap enough to add as a second machine but it's not the jump forward an upgrade is meant to be. Consider a used P1S or a Voron kit instead.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€289). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇪🇸 Creality K2 SE Impresora 3D con 2 Rollos filamento Hyper PLA RFID (Color Aleatorio), impresión 500 mm/s, Volumen 220×215×245 mm, Auto-nivelación, extrusor Directo, chasis metálico EstableAmazon.es · New€289.00View
- 🇪🇸 Creality K2 SE Impresora 3D con filamento PLA de 2 kg (Color Aleatorio), admite impresión Multicolor, Requiere CFS, 500 mm/s, impresión de Alta Velocidad, nivelación automática Volumen de impresiónAmazon.es · New€313.96View
- 🇪🇸 Creality K2 SE Impresora 3D compacta de sobremesa, impresión Multicolor con CFS, 500 mm/s, nivelación automática, Control de Vibraciones. Tamaño: 220x215x245 mmAmazon.es · New€333.92View
- 🇪🇸 Creality K2 SE 4C Impresora 3D con CFS Nano, impresión multimaterial en 4 Colores, impresión de Alta Velocidad de hasta 500 mm/s, extrusora Directa, nivelación automática, 220 × 215 × 245 mm EspacioAmazon.es · New€399.00View
- 🇪🇸 Creality K2 SE Combo impresora 3D, impresión 3D multicolor con CFS, 500 mm/s, impresión de alta velocidad, nivelación automática, control de vibración, extrusora Direct Drive, espacio 220 × 215 × 245Amazon.es · New€495.00View
- 🇪🇸 Creality K2 SE Combo Impresora 3D 2026, Multicolor con CFS, impresión rápida de 500 mm/s, extrusor de accionamiento Directo, nivelación automática, Volumen de impresión de 220 × 215 × 245 mmAmazon.es · New€499.00View
- 🇪🇸 Creality K2 SE Combo Impresora 3D – Impresión Multicolor con CFS, Alta Velocidad 500 mm/s, Nivelación Automática, Extrusor Directo, Bastidor Metálico Sólido, Volumen de Impresión 220×215×245 mmAmazon.es · New€499.00View
- 🇪🇸 Creality Impresora 3D K2 SE Combo 2026, Impresión Multicolor con CFS, Velocidad de hasta 500 mm/s, Nivelación Automática Inteligente, Estructura Metálica, Totalmente Ensamblada, Volumen de ConstruccióAmazon.es · New€499.00View
Close alternatives - what €289 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 11.6 L vs 1.7 L build volume, 300°C hot end vs 260°C.
Get: 6.0 L more build volume (17.6 L).
Modest upgrade on the spec sheet.
Frequently asked
What materials can the Creality K2 SE Impresora 3D con 2 Rollos filamento Hyper print? +
At €289 the Creality K2 SE Impresora 3D con 2 Rollos filamento Hyper has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the Creality K2 SE Impresora 3D con 2 Rollos filamento Hyper? +
Advertised at 500 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Creality K2 SE Impresora 3D con 2 Rollos filamento Hyper? +
220×215×245 mm (11.6 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the Creality K2 SE Impresora 3D con 2 Rollos filamento Hyper have auto-levelling? +
Yes - Smart leveling auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Creality K2 SE Impresora 3D con 2 Rollos filamento Hyper worth €289? +
€289 is the sweet spot tier. The Creality K2 SE Impresora 3D con 2 Rollos filamento Hyper competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
