3D-Pioneer.com
3D-Pioneer.com

Paranız karşılığında en iyi 3D yazıcıyı bulun - özellik vs. fiyat, pazarlama gürültüsü yok.

Best 3D printers with high-temp heated beds

Updated 26 September 2026 · Live prices updated daily

Printers whose heated bed clears 100 °C. Essential for reliable ABS, ASA and PA-CF adhesion without lifting corners.

  1. #1
    ANYCUBIC () Anycubic Kobra S1 MAX + PLA Filament 1.
    ANYCUBIC
    () Anycubic Kobra S1 MAX + PLA Filament 1.
    $747 CoreXY · heated chamber · 42.9 L · 350°C · LeviQ 3.0
  2. #2
    R QIDI TECHNOLOGY QIDI Max4
    R QIDI TECHNOLOGY
    QIDI Max4
    $1299 CoreXY · heated chamber · 51.7 L · 370°C · Loadcell Sensor Integrated int
  3. #3
    R QIDI TECHNOLOGY QIDI Plus5
    R QIDI TECHNOLOGY
    QIDI Plus5
    $749 CoreXY · heated chamber · 30.7 L · 370°C · Loadcell
  4. #4
    R QIDI TECHNOLOGY QIDI Plus5 Multi-Color
    R QIDI TECHNOLOGY
    QIDI Plus5 Multi-Color
    $899 CoreXY · heated chamber · 30.7 L · 370°C · Loadcell
  5. #5
    R QIDI TECHNOLOGY QIDI Q2 Multi-Color
    R QIDI TECHNOLOGY
    QIDI Q2 Multi-Color
    $649 CoreXY · heated chamber · 18.7 L · 370°C · Loadcell
  6. #6
    FLASHFORGE Creator 5 Pro Industrial
    FLASHFORGE
    Creator 5 Pro Industrial
    $849 CoreXY · heated chamber · 16.8 L · 320°C · Fully Automatic Calibration &
  7. #7
    Creality K1 Max
    Creality
    K1 Max
    $481 CoreXY · 27.0 L · 300°C · AI LiDAR
  8. #8
    Creality K2 Plus
    Creality
    K2 Plus
    $975 CoreXY · 42.9 L · 350°C · Strain gauge
  9. #9
    Longer New LK10 Plus
    Longer
    New LK10 Plus
    $378 Bedslinger · 41.0 L · 300°C · Eddy current
  10. #10
    R QIDI TECHNOLOGY QIDI PLUS4
    R QIDI TECHNOLOGY
    QIDI PLUS4
    $649 CoreXY · 26.2 L · 370°C · Automatic

Matt's take

Bed temperature is the quiet spec that separates "can print ABS if you cross fingers" from "prints ABS reliably". Most PLA-focused machines top out at 70-80 °C because that is all PLA needs. ABS wants 100-110 °C, ASA similar, and filled nylons 90-110 °C. Without that bed heat, corners peel as the print cools and you end up running a brim or raft on every part. Pair with an active heated chamber for best results - bed heat alone helps but doesn't fully solve warp on tall ABS.

Frequently asked

Do I need a 100 °C heated bed? +

Only if you print ABS, ASA, or filled nylons. PLA and PETG are happy at 60-80 °C. If you never leave PLA territory, a high-temp bed is unused capability.

Why does bed temperature matter for ABS? +

ABS shrinks as it cools from its 100 °C+ print temperature. A hot bed keeps the bottom layers near glass transition, so the shrink happens gradually rather than snapping the print off the plate at hour three.

Is a garolite/FR4 bed surface different from PEI? +

Garolite is the de-facto surface for nylon because nylon refuses to stick to PEI. If you plan to print nylon, check that the printer either ships a garolite plate or accepts a swap-in one. Otherwise it is an extra £30 and often an extra week's wait.

Other shortlists
for ABS, ASA and nylon large-format 3D printers CoreXY 3D printers for beginners Quietest 3D printers - flat and studio friendly multi-colour and multi-material 3D printers for tabletop miniatures for schools and classrooms with remote monitoring Fastest 3D printers (by real volumetric flow) compact 3D printers (small desks, small spaces) for cosplay and props

Related reading

Long readIs an enclosed 3D printer worth it?When the enclosure premium actually pays back - and when it is money wasted on PLA.Read →Long readHow to pick your first 3D printerSpec by spec, what actually matters on a first printer and what the marketing hopes you will not question.Read →

Ranking is spec-driven. It favours printers that objectively have the capabilities this shortlist targets. Firmware, support quality and long-term reliability aren't on the spec sheet - read the full printer page and owner reports before committing.