Stampante 3D Long LK5 Pro 3 da 11
Updated 6 September 2026 · Live prices on every page load from Amazon US + UK
Buy on Amazon.it - €413.69 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 36.0 L build volume - room for helmets, large functional parts, bulk runs.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the Longer Stampante 3D Long LK5 Pro 3 da 11. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€414). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇮🇹 Stampante 3D Long LK5 Pro 3 da 11,8 x 11,8 x 15,7 pollici, stampante 3D FDM di grandi dimensioni di stampa, aggiornamento della scheda madre TMC 2209 con stampa curriculum, 95% preassemblata, idealeAmazon.it · New€413.69View
Close alternatives - what €414 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 36.0 L vs 18.7 L build volume.
Get: 6.4 L more build volume (42.4 L) · 300°C hot end (was —°C).
Get: 300°C hot end (was —°C) · CoreXY motion - faster, more rigid.
Frequently asked
What materials can the Longer Stampante 3D Long LK5 Pro 3 da 11 print? +
At €414 the Longer Stampante 3D Long LK5 Pro 3 da 11 realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How fast is the Longer Stampante 3D Long LK5 Pro 3 da 11? +
Advertised at 180 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Longer Stampante 3D Long LK5 Pro 3 da 11? +
300×300×400 mm (36.0 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.
Is the Longer Stampante 3D Long LK5 Pro 3 da 11 worth €414? +
€414 is the sweet spot tier. The Longer Stampante 3D Long LK5 Pro 3 da 11 competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
