Stampante 3D Ender 3 V3 KE
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.it - €265.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ✓ Under €300 - low-risk way to get into 3D printing without regretting the spend.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the Creality Stampante 3D Ender 3 V3 KE. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€265). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇮🇹 Creality Stampante 3D Ender 3 V3 KE, 500 mm/s di Stampa ad Alta Velocità con Livellamento Automatico, Printer 3D L'estrusore Diretto Sprite Supporta la Stampa a 300℃, Volume di Stampa 220×220×250 mmAmazon.it · New€265.00View
- 🇳🇱 FTVOGUE Ender-3 V3 KE 3D-printer Hoge Snelheid 500 Mm/s Automatisch Nivelleren Touchscreen 4,3 Inch met Direct Extruder Stil Moederbord Bouwvolume 220x220x240 Mm voor PLA, PETG, TPU, ABS (EU-stekker)Amazon.nl · New€496.64View
- 🇵🇱 Creality Ender-3 V3 KE drukarka 3D, 500 mm/s, szybsza prędkość drukowania FDM z automatycznym poziomowaniem, drukarka 3D z wytłaczarką Sprite Direct, rozmiar druku 220 x 220 x 240 mmAmazon.pl · Newzł1145.94View
Close alternatives - what €265 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 300°C hot end vs 280°C.
Get: 5.2 L more build volume (16.8 L) · 350°C hot end (was 300°C).
Get: CoreXY motion - faster, more rigid.
Frequently asked
What materials can the Creality Stampante 3D Ender 3 V3 KE print? +
At €265 the Creality Stampante 3D Ender 3 V3 KE has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the Creality Stampante 3D Ender 3 V3 KE? +
Advertised at 500 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Creality Stampante 3D Ender 3 V3 KE? +
220×220×240 mm (11.6 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the Creality Stampante 3D Ender 3 V3 KE have auto-levelling? +
Yes - CRTouch auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Creality Stampante 3D Ender 3 V3 KE worth €265? +
€265 is the sweet spot tier. The Creality Stampante 3D Ender 3 V3 KE competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
